Products|Chemical
MR.COOL Pre-Mixed Coolant
GENERAL:
MR. COOL Pre-mixed coolant provide protection and longer engine life.
Formulated is based on monoethylene glycol combined with special inhibitor additive technology to provide longer protection to engine compared to conventional engine coolant.
Protects aluminium and all cooling system metal part against rust and corrosion.
MR. COOL Pre-Mixed coolant is suitable for European, Japanese, Asian and USA car cooling system.
Formulated is based on monoethylene glycol combined with special inhibitor additive technology to provide longer protection to engine compared to conventional engine coolant.
Protects aluminium and all cooling system metal part against rust and corrosion.
MR. COOL Pre-Mixed coolant is suitable for European, Japanese, Asian and USA car cooling system.
FORMULATED:
Recommender:
MR.COOL Pre-Mixed coolant change every 30,000 km
Direction:
Drain and Flush cooling system.
Check all joints and hose clips.
Pour the content into radiator.
Run engine with Pre-Mixed coolant and recheck level.
Check for overheating, consult professional installer if overheating exist.
Remove any spillage immediately to avoid stained paintwork.
Caution:
Caution when removing radiator or overflow cap to avoid burn injury caused by release of hot liquid or steam.
See owner’s manual for cap removal instructions.
Keep out of reach of children.
Avoid skin and eye contact. If swallowed, dilute by drinking water or milk, seek medical advice. If skin or eye contact occurs, wash thoroughly with water.
DIRUMUSKAN:
MR .COOL Bahan pendingin pracampuran memberikan perlindungan dan hayat enjin yang lebih lama.
Dirumus berasaskan monoetilena glikol digabungkan dengan teknologi aditif perencat khas untuk memberikan perlindungan lebih lama kepada enjin berbanding penyejuk enjin konvensional.
Melindungi aluminium dan semua bahagian logam sistem penyejukan daripada karat dan kakisan.
MR COOL. Penyejuk Pra-Campuran sesuai untuk sistem penyejukan kereta Eropah, Jepun, Asia dan Amerika Syarikat.
Pengesyor:
MR.COOL Pre-Mixed coolant tukar setiap 30,000 km
DIRECTIONS:
Sistem penyejukan longkang dan Flush.
Periksa semua sambungan dan klip hos.
Tuangkan kandungan ke dalam radiator.
Jalankan enjin dengan bahan penyejuk Pra-Campuran dan semak semula tahap.
Semak kepanasan melampau, rujuk pemasang profesional jika wujud terlalu panas.
Keluarkan sebarang tumpahan dengan segera untuk mengelakkan kerja cat bernoda.
Awas:
Berhati-hati apabila menanggalkan radiator atau penutup limpahan untuk mengelakkan kecederaan terbakar yang disebabkan oleh pelepasan cecair panas atau wap.
Lihat manual pemilik untuk arahan mengeluarkan topi.
Jauhi dari kanak-kanak.
Elakkan sentuhan kulit dan mata. Jika tertelan, cairkan dengan meminum air atau susu, dapatkan nasihat doktor. Jika terkena kulit atau mata, basuh dengan air hingga bersih.
